Winnisquam Wood Product - Custom Counter Top Fabricator Winnisquam Wood Product - Custom Counter Top Fabricator
Laminate
Custom Laminate
    Square Edge
    Bevel Edge
    Wood Edge
 
Post Form Laminate
    E2000
    Amore
    Stocked Colors
 
Finishes

Custom Wood Edge Counter Tops

A custom wood edge (CWE) counter top is fabricated similarly to the standard CSE top by laminating a ¾" substrate deck with a ¾" by 1 ¾" build up making the front edge 1 ½" thick. The only difference is that the front edge is banded with wood. This upgrades the durability of the countertop. A custom wood edge can also easily be re-sanded or re-finished if dented or scratched. Wood Edge Tops Available in the following species: Oak, Cherry, Maple, White Birch, Red Birch, Hickory, Ash & Others

Winnisquam Wood Products fabricates both 'Flush' mount and 'Overlay' wood countertops
Overlay Profiles
These are edge details where the wood is applied before the deck is laminated. Once the top sheet has been applied, the desired profile is then routed into the front. With overlay profiles you will the black line of the laminate above the wood.
Flush Profiles
These are edge details where the wood is applied after laminating the deck sheet. Flush profiles will not show the black line of the laminate. The wood is mounted flush with the top sheet. This eliminates the black line but exposes the wood to any moisture that can sit on top of countertop. Over time if occasional water will darken the wood abutting to laminate.

Custom Wood Edge Check List